Call our customer services team on:
0345 366 6666
Email - email@example.com
In the 1st decade of this century very high world prices for new/scrap metals greatly increased their attraction to thieves, and resulted in a surge in the incidence of theft from all sorts of locations/premises.
Since then, partly due to increased police activity in this area, new laws limiting cash purchases by scrap metal dealers and world prices dropping back due to lower world demand, metal theft has decreased. Nonetheless, criminals have become more alert to the possibilities in this area and metal theft still occurs, meaning it remains necessary to be on increased alert.
Whilst thieves traditionally targeted Non-Ferrous Metals (NFM) such as copper, lead, tin and related alloys, e.g. brass and bronze; higher values mean that traditionally less attractive NFM such as aluminium and ferrous metals, such as iron and steel (stainless and mild) can now be a target.
With metal theft now affecting many business/community premises and even homes, this Hardfacts outlines the problem and considers measures that can be taken to reduce the risk.
Metal theft is no longer confined to the contents of buildings and yards, as was often the case in the past, but now extends to include parts of premises; e.g. building roofs, roof flashings, door hardware, boilers and plumbing, electric cables/sub station components; plus premises gates, fencing, sculptures/statues and highway signs and drain/manhole covers.
Historic buildings can be at particular risk, as they often incorporate considerable amounts of lead or copper roofing; and by their very nature empty buildings and construction sites are also at increased risk.
When part of a building's roof is stolen the costs of repairing consequent damage , e.g. following ingress of rainwater, plus coping with the disruption caused, can far exceed the cost of the stolen metal itself.
With many empty buildings not visited regularly, and typically also lacking remote monitored intruder alarm protection, they can be prone to a 'strip out' - where nearly all metal is removed by thieves, e.g. electrical cable/switchgear, pipework, radiators, flashings, and even structural steelwork. Such an event often results in massive collateral property damage, and in extreme cases the building may be rendered unsafe, or be deemed beyond economic repair, and will need to be demolished.
Note. Signs of damp or water ingress may provide an early indication of otherwise un-noticed theft of roofing or roof flashings, and so should always be promptly investigated.
Subject to its availability, insurane is one means by which financial recompense for losses may traditionally be provided. In this regard you should ensure that:
Of course, insurance isn't a substitute for adequate security and, depending on individual circumstances, may either not be available at all or at economic cost; so let us look at what can be done to protect against metal theft.
As a first step you should look at your premises and take note of what metals you have, where they are located, their likely values/attraction to thieves and the possible impact of their loss. You should then consider how they currently are, or might better be, protected.
When considering current/future security, it can be helpful to think of 'layers' of protection, each layer needing to be overcome by thieves before they achieve their aim. Good security is usually achieved by having a complementary range of security measures in place at each 'layer' and overall.
Note. In the event of metal theft, careful consideration needs to be given as to whether it is replaced at all, replaced in smaller quantities, replaced with something less attractive/valuable or, if replaced like for like, is provided with enhanced security. If you don't consider your replacement strategy in such terms it is likely you will suffer a repeat loss.
1st Layer - Physical Security
Hindering access/removal of metals has to be a priority; but protecting contents is a simpler task than protecting a structure or items in the open. For each of these areas consider:
Preventing theft of items within a building
Store metals in areas of robust construction, with access doors and windows kept in good condition and suitably secured. 'Hardfacts' 3017: Door & Window Security, gives further advice on physical security, but if in doubt seek the advice of a competent locksmith, e.g. a member of the Master Locksmiths Association.
Also think about further restricting access to items within by:
Preventing theft of parts of the building
Lead/copper roofs, flashing, gutters and down pipes are common targets, so consider:
Note. To help avoid any legal liability issues that may otherwise arise, such security measures should be installed above 2.5 m in height with suitable warning signs displayed.
Preventing theft of items in the open
It is best to avoid external storage; but where it's unavoidable consider robust fencing/gates, with suitable locks, and also consider telescopic posts across vehicular access points. Items such as statues should be secured to a substantial well anchored plinth or other sub-structure.
2nd Layer - Human Surveillance
In some cases manned guarding may be appropriate, in which case ensure any contracted guards hold Security Industry Authority (SIA) licenses.
When choosing a guarding company, National Security Inspectorate (NSI) or Security Systems and Alarms Inspection Board listing is one of the best indicators of full compliance (supported by external auditing) with UK manned guard licensing rules and good security practice, e.g. adherence to recognised British Standards; but membership of the Security Industry Authority (SIA) Approved Contractor Scheme (ACS) is also indicative of good standards.
In other cases any surveillance must rely upon any 'neighbours', who should be asked to inform you or the police of any unusual activity. In this regard ensure you:
Note. Many thefts of roofing have taken place where neighbours have seen thieves in action and, in the absence of contact with/information provided by the property owner, have either assumed the thieves were contractors working at the premises, or have been told this by the thieves and accepted it.
3rd Layer - Electronic Detection
An intruder alarm is a recognised means of detecting break-ins to buildings, but to be effective needs to have fully monitored remote signalling. Detecting theft of the building, or items in the open, can utilise battery powered wireless alarm systems, but a more effective solution usually requires remotely monitored CCTV.
'Hardfacts' 3015: Intruder Alarms - Guidelines for Purchasers and 'Hardfacts' 3004: CCTV - Guidelines for Purchasers, provide further advice.
4th Layer - Removing/Reducing Attraction
Thieves can't steal what's not there, so consider:
Note. Consult your property insurer(s) before replacing any metal roofing with felt or other combustible materials.
For all remaining metal fixtures consider:
5th Layer - Recovery
The police are alert to the problem of metal theft, and many forces have special units/operations targeting metal theft, with many reputable scrap dealers actively looking to assist them, e.g. by using UV lights to check offered scrap metal for any forensic marking.
Even if stolen metal is recovered, the police may be unable to successfully prosecute those in possession of it, or return it to the true owners, without proof of ownership, so consider:
Note. In the event of a loss, photographs can also assist in restoration/establishing values
Key Action Steps
Ascertain what you may have that is at risk of theft.
Sources of Further Information
Other Hardfacts in the Property Protection - Security series, which are available in our 'Knowledge Store' at www.aviva.co.uk/risksolutions
ATG (Vehicle Security Posts), Tel 01942 685522 or visit www.atgaccess.com
Master Locksmiths Association (MLA). Tel 01327 262255/264687 or visit www.locksmiths.co.uk
Selectamark Ltd. Tel 01689 860757 or visit www.selectamark.co.uk
Smartwater Ltd. Tel 0800 328 6268 or visit www.smartwater.com
This document contains general information and guidance and is not and should not be relied on as specific advice. The document may not cover every risk, exposure or hazard that may arise and Aviva recommend that you obtain specific advice relevant to the circumstances. AVIVA accepts no responsibility or liability towards any person who may rely upon this document.
Was this helpful to you?